sbe / sbf lighted pushbutton switches - sealed (ip65) phone 707-778-6311 fax 707-778-6401 e-mail info@schurterinc.com website http://www.schurterinc.com 59 models dimensions part number sbe 0041.3012 can be combined with all contact blocks. with colored, transparent or covered lenses as well as with legend plate inserts and indicator for key position. sbe lighted pushbutton switch 18 x 24mm sbe 0041.3014 can be combined with all contact blocks. with colored, transparent or covered lenses as well as with legend plate inserts and indicator for key position. sbe 0041.3016 can be combined with all contact blocks. with colored, transparent or covered lenses as well as with legend plate inserts and indicator for key position. sbe lighted pushbutton switch 18mm 8 n 6 mm ac (category 11) dc (category 11) u i 250 v u i 300 v u e 250 v u e 220 v, 110 v, 60 v, 24 v i e 5 a sev/csa i e 0.2 a, 0.4 a, 1 a, 2 a 6.3 (3) a vde/ul/semko 1-pole 4 (3) a semko 2-pole ip 65 according to iec 529 (front side) qualified for equipment of protection class ii/iec 536 actuating force operating travel rated insulation voltage rated voltage rated current mech. lifetime breaking capacity 10 6 10 5 10i e 1.1i e protection class degree of protection (see pg. 93 for key to ip codes) general description sbe and sbf actuators permit optimum use of the avialable area with minimum space requirement and are the mechanically robust version of the emf series actuators (see pg. 56 ). the sbe is built according to sev 1005, vde 0630, semko 124, csa c22.2/14, ul 508, cee 24. both the sbe and sbf have international approvals from ul, csa, vde, semko, sev. illumination: the actuators can be used with incandescent lamps, neon lamps and led?s with sockets and resistors. the actuator sockets accept mini lamps t5, 5k-22 max. length. sbe lighted pushbutton switch 18 x 18mm sbf 0041.3009 can be combined with contact block 0041.3101/3102 red mushroom switch, latching in depressed position, twist to reset. with center of pressure for inadvertant operation. 0886.0008 (required accessory) yellow, panel nameplate, pvc foil, self adhesive, 16mm cutout sbf emergency stop switch 32mm technical data
sek cont act blocks - sealed (ip 65) models dimensions part number contact block with hard silver contacts the series sek contact blocks can be connected to built-in units as described on page 59. the 2.8 x 0.8 mm quick connect terminals can also be used as solder terminals. the contact blocks have a quick-release fastener for connecting to the actuators. the contact blocks each have one n.c. and one n.o. contact (change-over). the contacts are self cleaning by the slight relative motion of the connection link. contact break is duplicated and under contraint for the n.c. contact. other cont act configurations available on request. t erminal markings the terminals are deignated in accordance with european standard en 50013 with 21 and 22 (31 and 32) for n.c. contacts and 13 and 14 (43 and 44) for n.o. contacts. the lamp terminals are marked x1 and x2. illumination the actuators can be used with incandescent lamps, neon lamps and led? s with sockets and resistors. the actuator sockets accept mini lamps t5, 5k-22 max. length. approvals ul recognition (file #e73407) vde approval sev approval csa certification (file #lr14568) semko approval 60 phone 707-778-631 1 fax 707-778-6401 e-mail info@schurterinc.com w ebsite http://www .schurterinc.com sek 0041.3105 2 n.o. + 2 n.c. contacts t5.5k lamp sockets lamps ordered separately; see page 64) sek 0041.3109 2 n.o. + 2 n.c. contacts t5.5k lamp sockets lamps ordered separately; see page 64) momentary action, lighted latching action, lighted momentary action, unlighted sek 0041.3101 1 n.o. + 1 n.c. contact
|
